6
2
Security 2
You can set up your machine with multiple
levels of security using TX Lock (For
MFC-7360), Memory Security (For
MFC-7470D) or Secure Function Lock 2.0
(For MFC-7860DN) and Setting Lock. You
will not be able to continue to schedule
Delayed Faxes or Polling jobs. However, any
prescheduled Delayed Faxes will be sent
even if you turn on TX Lock or Secure
Function Lock 2.0, so they will not be lost.
TX Lock
(
MFC-7360
)
2
TX Lock lets you prevent unauthorized
access to the machine. While TX Lock is on,
the following operations are available:
Receiving faxes
Fax Forwarding
(if Fax Forwarding was already on)
Remote Retrieval
(if Fax Storage was already on)
PC Fax Receive
(if PC Fax Receive was already on)
While TX Lock is on, the following
operations are NOT available:
Sending faxes
Copying
PC printing
Scanning
• To print the faxes in memory, turn off TX
Lock.
• If you forget the TX Lock password,
please call your Brother dealer.
Setting up the password 2
If you have already set the password, you will
not need to set it again.
a Press Menu, 1, 6, 1.
b Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c If you are entering the password for the
first time, the LCD will show Verify:.
d Re-enter the password.
Press OK.
e Press Stop/Exit.
Changing the TX Lock password
a Press Menu, 1, 6, 1.
b Press a or b to choose Set Password.
Press OK.
c Enter the registered four-digit password.
Press OK.
d Enter a four-digit number for the new
password.
Press OK.
e If the LCD shows Verify:, re-enter the
new password.
Press OK.
f Press Stop/Exit.
Security features 2
To Next Page
Loading...
Need help?
General
