Chapter 2
2 - 5
Setting the Beeper Volume
You can change the beeper volume. The
default setting is
Med. When the beeper is on,
the machine will beep when you press a key,
make a mistake, or after you sent or received
a fax.
1
Press Menu/Set, 1, 4, 2.
2
Press ▲ or ▼ to select Low, Med, High
or
Off.
Press Menu/Set.
3
Press Stop/Exit.
Setting the Speaker Volume
You can adjust the machine’s one-way
speaker volume.
1
Press Menu/Set, 1, 4, 3.
2
Press ▲ or ▼ to select Low, Med, High
or
Off.
Press Menu/Set.
3
Press Stop/Exit.
Turning on Automatic
Daylight Savings Time
You can set the machine to change
automatically for Daylight Savings Time. It
will reset itself forward one hour in the Spring
and backward one hour in the Autumn. Make
sure you have set the correct day and time in
the
Date/Time setting.
1 Press Menu/Set, 1, 5.
2
Press ▲ or ▼ to select
To Summer Time
(or
To Winter Time).
Press Menu/Set.
3
Press Stop/Exit.
Toner Save
You can conserve toner using this feature.
When you set Toner Save to
On, print
appears lighter. The default setting is
Off.
1
Press Menu/Set, 1, 6, 1.
2
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
3
Press Stop/Exit.
Volume
2.Beeper
Volume
3.Speaker
General Setup
5.Clock Change
Ecology
1.Toner Save
To Next Page
Loading...
