Brother MFC-7420

Chapter 2
2 - 7
Setting up the password
Note
■ If you have already set the password, you
will not need to set it, again.
■ If you forget the TX Lock password,
please call your Brother dealer for service.
1
Press Menu/Set, 1, 8, 1.
2
Enter a four-digit number for the
password.
Press Menu/Set.
If you are entering the password for the
first time, the LCD shows
Verify.
3
Re-enter the password.
Press Menu/Set.
4
Press Stop/Exit.
Changing the TX Lock password
1
Press Menu/Set, 1, 8, 1.
2
Press ▲ or ▼ to select Set Password.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
4
Enter a four-digit number for the new
password.
Press Menu/Set.
5
If the LCD shows Verify, re-enter the
new password.
Press Menu/Set.
6
Press Stop/Exit.
Turning TX Lock on
1 Press Menu/Set, 1, 8, 1.
2
Press ▲ or ▼ to select Set TX Lock.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
The machine goes offline and the LCD
shows
TX Lock Mode.
Turning TX Lock off
1
Press Menu/Set.
Enter the registered four-digit password.
2
Press Menu/Set.
TX Lock is automatically turned off.
Note
If you enter the wrong Password, the LCD
shows
Wrong Password and stays offline.
The machine will stay in TX Lock Mode until
the registered password is entered.
Security
1.TX Lock
Security
1.TX Lock