Specifications
S - 6
Interfaces
Note
Your machine has a full-speed USB 2.0 interface. This interface is compatible with Hi-Speed USB
2.0; however, the maximum data transfer rate will be 12 Mbits/s. The machine can also be
connected to a computer that has a USB 1.1 interface.
Please make sure you use a USB 2.0 interface cable that is no longer than 2.0 m.
Interface Recommended Cable
Parallel A bi-directional shielded parallel cable that is IEEE 1284 compliant and
no longer than 2.0 m.
USB A USB 2.0 interface cable that is no longer than 2.0 m.
LAN cable (MFC-7820N only) Ethernet UTP cable category 5 or greater.
(Cables are not included.)
To Next Page
Loading...
