Brother MFC-7420

Making copies
8 - 6
8
Making N in 1 copies (Page Layout)
You can reduce the amount of copies by
using the N in 1 copy feature. This allows you
to copy two or four pages onto one page,
allowing you to save paper.
Note
■ Please make sure paper size is set to A4,
Letter or Legal.
■ You can use N in 1 copy feature with
100% copy size only.
■ (P) means Portrait and (L) means
Landscape.
1
Press (Copy) to illuminate it in
green.
2
Load your document.
3
Use the dial pad to enter the number of
copies you want (up to 99).
4
Press Options and ▲ or ▼ to select
Page Layout.
Press Menu/Set.
5
Press ▲ or ▼ to select 2 in 1 (P),
2 in 1 (L), 4 in 1 (P) or
4 in 1 (L).
Press Menu/Set.
6
Press Start to scan the document.
If you are using the scanner glass:
7
After the machine scans the page,
the LCD shows:
Press 1 to scan the next page.
8
Set the next page on the scanner glass.
Press Menu/Set.
Repeat Steps 7 and 8 for each page of
the layout.
9
After all the pages of the document have
been scanned, press 2 to end.
When using the ADF, place document face
up in the direction shown below.
2 in 1 (P)
4 in 1 (P)
Next Page?
1.Yes 2.No
2 in 1 (L)
4 in 1 (L)