18 - 12 USING YOUR MFC WITH A MACINTOSH
®
10
Select Set Default Printer from the Printing menu.
For Mac OS
®
X users
You need to install the PS driver using the following instructions.
■
If a Brother Native Driver (MFC-XXX) is already listed in
Printer list, you will need to delete it and then install the PS
driver.
■
To use the PS driver with a USB cable, you need to set the
Emulation
to
BR-Script3
(
Menu
,
4
,
1
) before
connecting the USB cable. (See Setting the Emulation
Selection
on page 11-17.)
1
Select Applications from the Go menu.
■
If you use a USB cable and your Macintosh
®
is “Mac OS
®
X”,
only one printer driver for an MFC can be registered in Print
Center.
To Next Page
Loading...
