19 - 1 NETWORK SCANNING (WINDOWS
®
98/98SE/ME/2000 PROFESSIONAL
19
To use the MFC as a Network Scanner, the NC-9100h Network
board should be installed into the MFC (MFC-8840DN standard) and
configured with TCP/IP and mail server settings if you use Scan to
E-mail (E-mail server). You can set or change NC-9100h settings
from the control panel or with the BRAdmin Professional utility or
Web Management. (Please see the NC-9100h User's Guide on the
CD-ROM.)
Network License
This product includes a single PC license. If you purchase an
optional Network LAN board NC-9100h that includes the license for
up to 4 additional Users, you can install the MFL-Pro Software Suite
including ScanSoft
®
PaperPort
®
on up to 5 PC’s for use on a
network. If you want to use more than 5 PCs with ScanSoft
®
PaperPort
®
installed, please purchase NL-5 which is a multiple PC
license agreement pack for up to an additional 5 Users. To purchase
NL-5, please contact your Brother Sales Office.
Registering your PC with the MFC
If you need to change the MFC that was registered to your PC during
the installation of MFL-Pro (see Quick Setup Guide on page 38),
follow the steps below.
1
For Windows
®
98/Me/2000
From the Start menu, select Control panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows
®
XP
From the Start menu, select Control panel, Printers and
Other Hardware, Scanner and Cameras (or Control panel,
Scanners and Cameras).
Network Scanning
(Windows
®
98/98SE/Me/2000
Professional and XP only)
To Next Page
Loading...
