Preparation and Simple Use Guide 3
PREPARATION
AND SIMPLE USE
Using the Glass Platen
To use the glass platen, the ADF must be empty.
Lift the document cover.
Using the document guidelines on the left, centre the document FACE DOWN on the glass
platen.
Close the document cover.
If the document is a book or is thick, do not slam the cover or press on
it, as damage to the glass platen may result.
3 Faxing from the ADF (Automatic Document Feeder)
Insert the document face up in the ADF.
Dial the fax number, then press Fax Start.
4 Faxing from the Glass Platen
Place the document face down on the glass platen.
Dial the fax number, then press Fax Start. The machine starts scanning the first page.
To send a single page, go to Step 5—OR—To send
multiple pages, go to Step 4.
Place the next page on the scanner glass and press Menu/Set. The machine starts scanning.
(Repeat Step 4 for each additional page.)
Press Fax Start to begin dialling.
Documents are
Face Down
on the Glass
Platen
1
2
3
1
2
1
2
NEXT:PRESS SET
DIAL:PRESS START
MEMORY #001 100%
3
4
5
To Next Page
Loading...
