54 Chapter 10
Temporary Copy Setting
You can improve your copies by using the Copy keys: Enlarge/Reduce, Contrast, and Options.
These settings are temporary, and the machine returns to its default settings 45 seconds after it
finishes copying. If you want to use these temporary settings again, place the next original in the
ADF or glass platen before the 45 seconds expire.
Copying Using Multiple Settings
You can try different combinations of settings for the best
results. After you finish your settings using the
Enlarge/Reduce, Contrast and Options keys, the LCD
shows:
■ Press or if you want to select additional settings.
—OR—
Press Copy if you are finished choosing settings.
To clear your settings and start over, press Clear Settings.
The LCD shows current copy setting status, you can set multiple settings.
PRESS COPY OR
FOR NEXT OPT.
No of Copies
Copy Contrast
Stack or
Sort
Copy Ratio
or
Special Copy Option
Copy Mode
(Type of Original)
To Next Page
Loading...
