22 Chapter 1
Changing Speed Dial Numbers
If you try to store a Speed Dial number in a location where a number is already stored, the screen
displays the current name stored there, then prompts you to either change it or exit.
1
Press Menu/Set, 2, 3, 1.
The screen prompts you to enter a location.
2
Use the dial pad to enter a two-digit location (00-99), and press Menu/Set.
3
Press 1 to change the number stored, or press 2 to exit without making a change.
4
Enter a new number.
◆ If you want to erase the number, press Stop/Exit when the cursor is to the far left of the
digits.
◆ If you want to change a digit, use or to position the cursor under the digit you want
to change, then enter the new digit—OR—Press Stop/Exit to delete all characters above
and to the right of the cursor.
5
Follow the directions in Storing Speed Dial Numbers.
You can print a list of all stored numbers. (See Using the Reports Key, page 34.)
To Next Page
Loading...
