Brother MFC-9180 - Sending a Fax from Your Macintosh Application

Using the Brother MFC with a New Power Macintosh
®
G3, G4 or iMac
™
/iBook
™
107
PRINTER/SCANNER
Sending a Fax from your Macintosh
Application
You can send a fax directly from your Macintosh application using the following steps:
1 Create a document in a Macintosh application.
2 To begin the fax transmission, select Print from the File menu.
The Printer dialog box appears:
When Printer is selected, the top button shows Print and the Address button is greyed.
3 From the Output pull-down menu, select Facsimile.
When Facsimile is selected, the top button shows Send Fax and the Address button is available.
4 Click Send Fax.
The Send Fax dialog box appears:
The Send Fax dialog box has two list boxes. The left box shows all the previously Stored Fax
Numbers; the right box will show the Destination Fax Numbers as you select them.