Brother MFC-9180 - Making Enlarged or Reduced Copies

Making Copies 55
COPIER
Making Enlarged or Reduced Copies
1 Insert the document face up in the ADF, or face down on the glass platen.
2 Using the dial pad, enter the number of copies you want (up to 99).
3 Press Enlarge/Reduce.
4 Press or to choose an enlargement or reduction ratio.
You can reduce to 50%, 71% or 25% of the original size by pressing key.
—OR—
You can enlarge to 141%, 150%, 200% or 400% by pressing key.
—OR—
You can press or
to select MANUAL and press Menu/Set, then use the dial pad to
enter an enlargement or reduction ratio between 25% and 400%. For example, press 5, 3 to enter
53%.
5 Press Menu/Set.
6 Press Copy—OR—Press or for additional settings.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1 Insert the document face up in the ADF, or face down on the glass platen.
2 Using the dial pad, enter the number of copies you want (up to 99).
3 Press Contrast.
4 Press to make a copy lighter, or to make a
copy darker, and then press Menu/Set.
5 Press Copy—OR—Press or for additional settings.
Special Copy Options (2 in 1, 4 in 1 or Poster copy) are not available with
Enlarge/Reduce.
– +
SELECT & SET