Troubleshooting and Maintenance 125
MAINTENANCE
Printed pages are blurred at
the centre or at either edge.
Blurred Page
Certain environmental conditions such as humidity, high
temperatures, etc. may cause this condition to occur. Make sure the
machine is placed on a flat, horizontal surface. Remove the drum
unit with the toner cartridge installed. Try rocking them from side
to side. You may clear a blurred page by wiping the scanner window
with a clean soft cloth. (See Regular Maintenance, page 128.) If a
blurred page occurs after cleaning and the display shows CHANGE
DRUM SOON, replace the drum unit with a new one.
Ghost images appear on
printed pages.
Ghost Images
Adjust the print conditions by changing the Print Density setting.
(See Setting the Print Density, page 30.)—OR—Rough surfaces or
thick media can cause a ghost image. Make sure you select the Paper
Type that suits the paper in your multi-purpose sheet feeder. (See
Paper Type, page 59 and 60 and Media Type, page 67.)
The drum unit is a consumable and it is necessary to replace it periodically.
DIFFICULTY SUGGESTIONS
To Next Page
Loading...
