EasyManua.ls Logo

Brother MFC-9420CN - DNS Server; Apipa

Brother MFC-9420CN
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front Panel Setup
3 - 6
3
DNS Server
1
Press Menu/Set, 6, 1, 8.
2
Press or to select Primary or Secondary.
3
Press Menu/Set.
4
Enter the DNS Server address.
5
Press Menu/Set.
6
Press Stop/Exit.
Primary DNS Server IP Address
This field specifies the IP address of the primary DNS (Domain Name Service) server.
Secondary DNS Server IP Address
This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS
server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server.
APIPA
When enabled, the print server will automatically allocate a IP address in the range (169.254.1.0 -
169.254.254.255) when the print server cannot obtain an IP address through the BOOT Method you have set
(Menu/Set, 6, 1, 1). Selecting Off means the IP address doesn’t change, when the print server cannot obtain
an IP address through the BOOT Method you have set.
1
Press Menu/Set, 6, 1, 9.
2
Press or to select On or Off.
3
Press Menu/Set.
4
Press Stop/Exit.

Table of Contents

Other manuals for Brother MFC-9420CN

Related product manuals