Name: Brother MFC-9420CN
Brand: Brother
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Internet printing for Windows®

5 - 3

Brother Internet Print: Using BRAdmin Professional utility to Configure the

Print Server

Note

Skip this section if you wish to use the Web Browser to configure the print server.

Using the BRAdmin Professional utility, you can configure the Brother print server using the TCP/IP protocol.

The steps required to configure the print server to receive print jobs from a Windows

98/Me/2000/XP and

Windows NT

4.0 PC running the BIP software are as follows.

Start the BRAdmin Professional utility.

Select the Node Name of the desired Brother print server from the list and double click on it. (the default

node name is usually BRN_xxxxxx, where xxxxxx is the last six digits of the Ethernet address (MAC

address)). You will be prompted for a password; the default password is “access”.

Note

You can find the node name and MAC address by printing out the machine configuration page. For

information on how to print the configuration page on your print server, see Printing the Network Configuration

List on page 3-16.

Click on the POP3/SMTP tab.

Enter the address of the POP3 server (consult your Network Administrator if you do not know this

address).

Enter the POP3 Account Name for the remote Brother print server. Usually this will be the first part of

the E-mail address (for example, if the E-mail address of the print server is emailprinter@xyz.com, then

the POP3 Account Name would be emailprinter).

Enter the password for the mailbox, if any.

The print server is configured by default to poll the POP3 server every 10 minutes. You may change this

value, if desired.

If you have enabled notification, enter the address of your SMTP server (consult your Network

Administrator if you do not know this address).

Press the OK button and save the changes. Now exit the BRAdmin Professional utility. You have now

configured the print server to receive print jobs.

Other manuals for Brother MFC-9420CN

Questions and Answers:

Need help?

Do you have a question about the Brother MFC-9420CN and is the answer not in the manual?

General

Print technology	Laser
Maximum resolution	1200 x 2400 DPI
Economical printing	Yes
Print speed (black, normal quality, A4/US Letter)	31 ppm
Print speed (color, normal quality, A4/US Letter)	8 ppm
Digital sender	No
Number of print cartridges	4
Scanner type	Flatbed scanner
Scanner features	Scan to: e-mail, image, OCR, file
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	31 cpm
Copy speed (color, normal quality, A4)	8 cpm
Faxing	Color faxing
Fax memory	500 pages
Modem speed	33.6 Kbit/s
Fax speed dialing (max numbers)	200
Total input capacity	750 sheets
Maximum input capacity	250 sheets
Auto document feeder (ADF) input capacity	35 sheets
Maximum internal memory	576 MB
Bundled software	ScanSoft PaperPort Presto! PageManager
I/O ports	IEEE-1284 USB 2.0
Dimensions (WxDxH)	483.5 x 514 x 530 mm
Printer management	BRAdmin Professional, MIB-II
Networking features	10Base-T/100Base-TX
All-in-one functions	Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Compatible operating systems	Windows 98(SE)/ Me/ NT WorkStation 4.0/ 2000 Professional/ XP Mac OS 9.1 - 9.2, Mac OS X 10.2.4+
Sustainability certificates	ENERGY STAR
Power consumption (standby)	85 W
Power consumption (PowerSave)	16 W
Power consumption (average operating)	1090 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %
Market positioning	Business