Brother MFC-9420CN - Del Error Mail; Notification; Setup Mail TX; Sender Subject

Front Panel Setup
3 - 11
3
Del Error Mail
When set to On, the machine automatically deletes error mails that the machine can not receive from the POP
server.
1 Press Menu/Set, 6, 3, 4.
2 Press ▲ or ▼ to select On or Off.
3 Press Menu/Set.
4 Press Stop/Exit.
Notification
The notification feature allows a confirmation of receipt message to be transmitted to the sending station
When the I-Fax has been received.
This feature only works on I-Fax machines that support the “MDN” specification.
1 Press Menu/Set, 6, 3, 5.
2 Press ▲ or ▼ to select On or MDN or Off.
3 Press Menu/Set.
4 Press Stop/Exit.
Setup Mail TX
This menu has three selections Sender Subject, Size Limit and Notification.
Sender Subject
This field displays the subject that is attached to the Internet Fax data being sent from the Brother machine
to a PC (default is “Internet Fax Job”).
1 Press Menu/Set, 6, 4, 1.
2 Select 1 to change the Sender Subject—OR—2 to exit.
3 Enter the subject information.
4 Press Menu/Set.
5 Press Stop/Exit.