Brother MFC-9465CDN - Page 254

3-71
Confidential
(6) Remove the Flat core and Film.
Fig. 3-74
(7) Remove the two Taptite bind B M4x12 screws and Taptite cup S M3x6 SR screw from the
right side of the Main body. Some products are not equipped with the Ground plate.
In that case, there is no need to remove the Taptite cup S M3x6 SR screw.
Fig. 3-75
Main body
Flat core
Film
<Left side>
Main body
<Right side>
Taptite bind B M4x12
Taptite cup S M3x6 SR
Ground plate