Brother MFC-9465CDN - Paper Eject Sensor PCB ASSY

3-182
Confidential
(5) Remove the two Taptite cup S M3x8 screws and two Taptite cup B M3x12 screws to
remove the Low-voltage power supply unit from the Base frame unit.
Fig. 3-270
Harness routing: Refer to “ Low-voltage Power Supply PCB ASSY”
9.68 Paper Eject Sensor PCB ASSY
(1) Release the Hook to remove the Paper eject sensor PCB ASSY from the Low-voltage
power supply cover.
Fig. 3-271
Harness routing: Refer to “ Low-voltage Power Supply PCB ASSY”
Taptite cup S M3x8
Taptite cup B M3x12
Base frame unit
Low-voltage power supply unit
<Back side>
Taptite cup S
Taptite cup B
M3x8
M3x12
Hook
Low-voltage power supply cover
1a
1b
1b
1a
Hook
Pin
Pin
<A view>
A view
Paper eject sensor PCB ASSY
Paper eject sensor PCB ASSY