3-96
Confidential
< Installing procedure>
(1) Fold the Second side scanning CIS flat cable at the Second side scanning CIS side as
shown in the how-to-fold figure below.
Fig. 3-119
(2) Mount the Second side scanning CIS flat cable at the Second side scanning CIS side to
the Second side scanning CIS.
Fig. 3-120
Assembling Note:
Since the Second side scanning CIS flat cable might be broken when you remove it from the
FFC holder ASSY, be sure to replace it with a new Second side scanning CIS flat cable.
When assembling a new Second side scanning CIS flat cable, be sure to assemble it in
accordance with the following procedure.
Reinforcement tape
Fold up FFC along with the dotted line
Fold down FFC along with the solid line
Reinforcement plate
1 mm
Second side scanning CIS flat cable
Second side scanning
Second side scanning CIS
CIS flat cable
To Next Page
Loading...
