Brother MFC-9465CDN - Page 314

3-131
Confidential
■ Legal model
(1) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the NCU FG harness
ASSY from the Main body.
(2) Disconnect the Connector (CN9) from the Main PCB ASSY.
(3) Disconnect the wiring from the Main PCB ASSY.
Fig. 3-185
(4) Remove the eight Taptite bind B M4x12 screws and two Taptite cup S M3x6 SR screws
from the Joint cover top.
Fig. 3-186
Screw pan (S/P washer) M3.5x6
Main body
NCU FG harness ASSY
Connector
CN9
Main PCB ASSY
Joint cover top
Taptite bind B M4x12
Taptite cup S M3x6 SR
<Front>
Taptite cup S M3x6 SR
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12