Brother MFC-9465CDN - Page 372

3-189
Confidential
(3) Remove the two Taptite bind B M3x10 screws to remove the Registration mark sensor
holder ASSY from the Base frame unit.
Fig. 3-282
(4) Remove the Taptite bind B M3x10 screw to remove the Shutter solenoid from the
Registration mark sensor holder ASSY.
Fig. 3-283
Taptite bind B M3x10
Base frame unit
<Back side>
Registration mark sensor holder ASSY
Taptite bind B M3x10
Shutter solenoid
Pin
Registration mark sensor holder ASSY