Brother MFC-T910DW - Page 115

Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on
Your Network (Windows 7, Windows 8 and Windows 10) > Scan Using Web Services from the Brother
Machine (Windows 7, Windows 8 and Windows 10)
Scan Using Web Services from the Brother Machine (Windows 7,
Windows 8 and Windows 10)
Related Models: DCP-T510W/DCP-T710W/MFC-T910DW
If you have installed the driver for scanning via Web Services, you can access the Web Services scanning menu
on your Brother machine's LCD.
• Certain characters in the messages displayed on the LCD may be replaced with spaces if the language
settings of your OS and your Brother machine are different.
• If the LCD displays an insufficient memory error message, choose a smaller size in the Paper size setting
or a lower resolution in the Resolution (DPI) setting.
>> DCP-T510W/DCP-T710W
>> MFC-T910DW
DCP-T510W/DCP-T710W
1. Load your document.
2. Press (SCAN).
3. Press a or b to select the [Web Service] option, and then press OK.
4. Press a or b to select the type of scan you want, and then press OK.
5. Press a or b to select the computer where you want to send data, and then press OK.
6. Press Mono Start or Colour Start.
The machine starts scanning.
MFC-T910DW
1. Load your document.
2. Press (SCAN).
3. Press a or b to select the following:
a. Select [WS Scan]. Press OK.
b. Select the type of scan you want. Press OK.
c. Select the computer where you want to send data. Press OK.
4. Press Mono Start or Colour Start.
The machine starts scanning.
Related Information
• Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10)
109