Brother P-touch E500 - Page 35

8
1
2
3
4
5
6
7
35
Using P-touch Transfer Manager (For Windows)
 USING P-TOUCH SOFTWARE
To change the names of templates or other data that will be transferred, click on the
desired item and enter the new name.
Select the folder containing the templates or other data that you want to transfer, and
then click [Transfer]. A confirmation message will be displayed.
Click [OK].
The selected templates or other data are transferred to the P-touch.
7
8
You can also transfer individual items to the P-touch. Select the template or other data
that you want to transfer, and then click [Transfer].
9
To print data that was transferred to the P-touch, the P-touch must be switched from the
transfer mode to the normal mode. Turn the P-touch off and then on again.