Brother P-touch E550W - Entering Accented Characters

EDITING A LABEL
28
Entering Accented Characters
Press the OK or Enter key to apply the setting.
The screen returns to the text entry screen.
Enter the symbol you want to add to your History.
Press the Symbol key.
The “History” appears, including the symbol entered in step 4.
The printer can display and print a set of accented characters such as language-specific
characters. Selectable “Accented Characters” are listed in the Appendix. (See page 85.)
Enter the character you want to change to an accented character.
Press the Accent key.
The character you entered changes to an accented character.
Press the Accent key repeatedly until the character you want appears, or select it using
the or key.
Press the OK or Enter key.
The selected accented character is inserted into the line of text.
3
For more information, see “Entering Symbols Using the
Symbol Function” on page 26.
4
5
• Up to 30 symbols can be added to the “History”. The oldest symbol will be deleted from the
category when the symbols added to the “History” exceed 30 symbols.
• To stop using the Symbol History, select “Off ” in the “Symbol History” screen.
Entering Accented Characters
1
Caps Mode can be used with the Accent function.
2
3
The order of accented characters displayed may differ depending on the selected LCD
language.
4
Press the Esc key to return to the previous step.