Brother P-touch E550W - Printing a Stored Label File; Deleting a Stored Label File

USING THE FILE MEMORY
42
Printing a Stored Label File
Press the File key.
Select “Print” using the or key, and then press the OK or Enter key.
Select a file number using the or key, and then press the Print, OK or Enter key.
• Printing a single page:
A single page is printed immediately.
• Printing a range of pages:
The screen you can specify the range is displayed. Select “All” or “Range” using the
or key, and then press the OK or Enter key.
Press the File key.
Select “Delete” using the or key and press the OK or Enter key.
Select a file number using the or key, and then press the OK or Enter key.
The message “Delete?” appears.
Press the OK or Enter key to delete the file.
Printing a Stored Label File
To print a label created using the transferred template, refer to “Using the Data Transferred to the
printer” on page 62.
1
2
3
If you select “Range”, specify the first page and the last page.
•Press the Esc key to return to the previous step.
• When the message “Press Print to Cut Tape and Continue” appears, press the Print key. To set
whether the tape is cut after each label is printed, use “Cut Option”. For details, refer to “Tape
Cutting Options” on page 36.
Deleting a Stored Label File
To delete a label using the transferred template, refer to “Deleting the Transferred Data” on
page 68.
1
2
3
4
Press the Esc key to cancel deleting the file and return to the previous screen.