LABEL PRINTING
40
Attaching Labels
If necessary, trim the printed label to the shape and length you want with scissors.
Peel the backing from the label.
Position the label and then press firmly from top to bottom with your finger to attach the
label.
Attaching Labels
• The backing of some types of tapes may be pre-cut to make it easier to peel the backing.
To remove the backing, fold the label lengthwise with the text facing inward to expose the inside
edges of the backing. Next, peel off the backing one piece at a time.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel
off easily from these surfaces.
• Make sure to read the instructions provided with Fabric Tapes, Extra Strength Adhesive Tapes,
or other special tapes and observe all precautions noted in the instructions.
To Next Page
Loading...
