Brother P-touch E550W - Tape Cutting Options

EDITING A LABEL
36
Tape Cutting Options
The tape cutting options allow you to specify how the tape is fed and cut when printing labels.
Press the Menu key.
Select “Cut Option” using the or key, and then press the OK or Enter key.
Set the value using the or key, and then press the OK or Enter key to apply the
settings.
Tape Cutting Options
Tape Cutting Options
1
2
3
New settings are NOT applied if you do not press the OK or Enter key.
•Press the Esc key to return to the previous step.
• Refer to the Tape Cutting Options table for a list of all available settings.
No Full cut Half cut Chain Image
1NoYesNo
2YesYesNo
3NoNoNo
4 Yes No No
5NoYesYes