Brother P-touch E550W - Advanced Serialize

8
1
2
3
4
5
6
7
9
10
33
Entering a Serialise Label
ENGLISH
 EDITING A LABEL
Press the OK or Enter key to display the screen that you set.
Example:
Advanced Serialize
 Simultaneous
Enter text.
Example: Create labels 1A-A01, 1A-B02, 1A-C03, 1A-D04
from 1A-A01 by using this function.
Press the Shift and Serialize keys and select “Simultaneous”
using the or key and press the OK or Enter key.
Specify the first range of characters that you want to increment.
• To specify one character, use the , , or key to position
the cursor under the character and press the OK or Enter key
twice.
• To specify a range of characters, use the , , or key to
position the cursor under the first character in the range and
press the OK or Enter key. Then, position the cursor under the
last character in the range and press the OK or Enter key.
Example: Select 1 of A01.
Repeat step 3 to specify the second range of characters that you
want to increment.
Example: Select A of A01.
Select “Count” and “Incremented by” using the or key and
set the value by using the or key.
Example: To increment the number by one four times, set
“Count”: 4, “Incremented by”: 1.
5
• When you press the Serialize key, you can change the settings. After changing the settings,
the message “OK to Overwrite the Data after This Position?” appears. If you want to
overwrite the settings, press the OK key.
• You can select “All”, “Current”, or “Range” when printing if there are multiple pages of
labels.
• To print labels refer to “Printing a Label” on page 38.
1
2
3
You cannot select the greyed-out characters.
4
5