III-
2
3.2 TIGHTNING TORQUE LISTS
Location Screw type Q’ty
Tightening torque
N•cm
Lower plate ASSY Taptite, bind B M2.6x6 4 0.343 ± 0.049
Power supply ASSY Taptite, bind B M2.6x6 2 0.343 ± 0.049
Ground spring plate Taptite, bind B M2.6x6 1 0.343 ± 0.049
FG harness ASSY Taptite, bind B M2.6x6 1 0.343 ± 0.049
Main PCB ASSY Taptite, bind B M2.6x6 1 0.343 ± 0.049
Media PCB ASSY Taptite, bind B M2.6x6 1 0.343 ± 0.049
Side cove L Taptite, bind B M2.6x8 2 0.343 ± 0.049
Side cove R Taptite, bind B M2.6x8 2 0.343 ± 0.049
Panel cover Taptite, bind B M2.6x8 2 0.343 ± 0.049
SB PCB ASSY Taptite, bind B M2.6x6 3 0.343 ± 0.049
Screw, bind M2.6x4 2 0.392 ± 0.098
Upper cover
Taptite, bind B M2.6x6 3 0.343 ± 0.049
Insert guide Taptite, bind B M2.6x8 2 0.245 ± 0.049
Mecha ASSY Taptite, bind B M2.6x6 2 0.343 ± 0.049
Cutter unit ASSY Screw, bind M2.6x5 2 0.392 ± 0.098
Platen shaft bush Screw, bind M2X4 1 0.098 ± 0.049
FG harness ASSY Screw, bind M3x4 1 0.588 ± 0.098
Tape feed motor ASSY Screw, bind M3x4 1 0.588 ± 0.098
To Next Page
Loading...
