Brother P-Touch QL-570 - Removing the Top Cover and Thermal Tape

 III-
5
3.4 DISASSEMBLY PROCEDURE
[ 1 ] Removing the Top Cover and Thermal Tape
Note: Turn on the power supply with top cover closed, initialize the machine before
disassembly.
(1) Turn off the power supply and remove the AC cord.
Fig.3.1-1 Removing the Top Cover and Thermal Tape (1)
(2) Open the top cover.
(3) Remove the thermal tape from the machine.
Fig.3.1-2 Removing the Top Cover and Thermal Tape (2)
Power button
A
C cord
Thermal tape
Top cover
1
2
2
1