Brother P-Touch QL-570 - Page 70

 III-
45
(3) Solder the harnesses of the sub ASSY inlet to the power supply ASSY as shown in the
figure.
Fig.3.2-32 Installing the Sub ASSY Inlet (2)
(4) Route the harness of the sub ASSY inlet as shown in the figure.
Fig.3.2-33 Installing the Sub ASSY Inlet (3)
Sub ASSY inlet harness
Power supply ASSY
Under cover
Hook
Hook
Hook
Hook
Sub ASSY inlet
Front
To power
supply ASSY