• Enable this address
Enables the specified static IPv6 address.
• Primary DNS Server IPv6 Address/Secondary DNS Server IPv6 Address
Specifies the DNS server IPv6 addresses.
• IPv6 Address List
Displays the list of IPv6 addresses.
Wired 802.1x Authentication
Configures IEEE 802.1x authentication.
• Wired 802.1x Status
Enable or disable IEEE 802.1x authentication for wired network.
• Authentication Method
Select the authentication method.
• User ID/Password
You can specify settings only when EAP-MD5, EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS is selected as
the authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a
client certificate must be registered. To register a certificate, connect to the printer from a web browser,
and then specify the certificate. Installation of the authentication certificate can also be performed with the
Printer Setting Tool by going to the menu bar: File > Install Certificates.
Related Information
• Change Printer Settings Using the Printer Setting Tool (Windows)
81
To Next Page
Loading...
