Brother VX883 - Pressure Adjuster

[ Pressure Adjuster
Correct pressure on presser foot is impor-
tant to obtain smooth sewing. Pressure
on presser foot requires to be regulated
according to the type and thickness of the
material to be sewn.
1. To regulate the pressure, lower presser
foot.
2. Push outer ring of pressure adjuster
down, and inner pin will spring up to
its highest position. In this position,
pressure is completely released from the
presser foot.
3. To increase pressure, push inner pin
down with your finger.
Mending
Normal use and
lighter material Medium
such as
Thick and
heavier Heavy
materials
Pressure on Foot
Free
Pressure Adjuster
UP
DOWN
- 10-
Sewing Purpose
Darning
Embroidering
Monogramming