Brother VX883 - Zigzag Stitching; Simple Zigzag Stitch; Satin Stitch

STITCH LENGTH
STITCH WIDTH
NEEDLE POSITION
PRESSER FOOT
NEEDLE
PRESSURE ADJUSTER
3
:
1 -4 (For SATIN STITCH, set at F)
:
1 - 5 (Twin needle sewing, always set
at 3)
:
M. L. R. (Twin needle sewing, always
set
at M)
: Zigzag
: Single or Twin Needle
: According to the mateiral
Zigzag Stitching
SIMPLE ZIGZAG STITCH
Set stitch length between 1-4 for simple
zigzag stitch.
1. With stitch length to between 0-1 sew
5-6 straight stitches for reinforcement.
2. Set stitch width to your desired width
and begin sewing.
3. Reset stitch width to "0" and set stitch
length to between 0-1 to again reinforce
stitches before removing work from
machine.
'
NOTE: Zigzag stitching requires less upper
thread tension than straight
stitch-
Ing.
SATIN STITCH
When stitch length is set between 0-1, it
produces the "SATIN STITCH'' which is
used for making fine buttonholes or de-
corative stitches.
NOTE:
It is recommended that a test
sample
be made before starting to
sew.