Brother VX883 - Built-in Stitches; Triple Stretch Stitch

[ Triple Stretch Stitch
J
PATTERN DIAL
: 2 (Triple Stretch St~tch)
STITCH LENGTH
4
5
STITCH WIDTH
n
Built-in Stitches
PRESSER FOOT
NEEDLE
PRESSURE ADJUSTER
:
Zigzag or Straight (See Note 1)
: Single
: According to the material
The "Triple Stretch Stitch" is used for any
stretch material
sirch as knitted fabric,
tricot, etc.
This stitch is three times the strength of a
regular stitch and gives elasticity to seams
which prevents thread breakage.
NOTE:
1. When sewing extremely light
or
elastic material use straight
stitch presser foot.
2. As adjusting stitch width dial,
You can get zigzag stitch.
Shell Stitch
I
PATTERN DIAL
: 5 (Shell Stitch)
STITCH LENGTH
A
. .
STITCH WIDTH : 5
PRESSER FOOT : Zigzag
NEEDLE
: Single
PRESSURE ADJUSTER
: According to the material
This stitch can be used for sewing a picoted
edge on a light material.
1. Sew material on bias, placing material
under the presser foot so that straight
stitches are sewn on seam line and zigzag
stitches are sewn slightly over seam edge.
2. This work requires a little tighter upper
thread tension than normal.
3. Sew at slow speed.
4. Edge of material will be picoted.
- 22 -