Brother VX883 - Lower (Bobbin) Thread

I Lower (Bobbin) Thread
HOW TO WIND BOBBIN
1
1. Loosen stop motion knob by turning it
2. Place an empty bobbin on the bobbin
toward you. winder pin.
3. Place thread spool on the spool pin and
take thread through bobbin winder
tension disc.
4.
Wind the thread a few times around
the bobbin clockwise and push the
bobbin toward bobbin presser. Start
the machine gently.
5. Bobbin stops winding when full.
6. Push the bobbin to the left and
remove
it. Tighten stop mofion knob
securely.