Brother VX883 - Button Sewing

HOW TO SECURE STITCHING AND CUT
MATERIAL FOR BUTTONHOLE.
1. To secure stitching, turn the material 90
degrees counter-clockwise and sew 5-6
straight stitches.
2. Remove from machine. Cut opening in
buttonhole with seam ripper tool, taking
care not to cut through any stitching.
3. It is recommended that pins are placed
across both ends of buttonhole as
protection against cutting bar tack
stitching.
MAKING SEVERAL BUTTONHOLES
OF THE EXACT SAME
SIZE
1. Set the sliding portion of the button-
hole foot according to the size of the
button and sew Step
A.
2. Sew Step B until the sliding portion no
longer moves.
3. Sew Step C.
4. Sew Step D until the sliding portion
returns to Step
A.
5. Repeat 1 through 4 for each additional
buttonhole of the same size, using
the same starting point.