BRP Evinrude E-Tec 300 - Latch Hook Installation; Upper Cover Cap Replacement; Upper Cover Service

50
ENGINE COVER SERVICE
UPPER COVER SERVICE
UPPER COVER SERVICE
Latch Hook Installation
Place hook into position on bracket.
Apply Ultra-Lock to screw threads. Tighten screws
to a torque of 60 to 84 in. lbs. (7 to 9.5 N·m).
Upper Cover Cap Replacement
Place new upper cap into position.
Tighten self-tapping screws to a torque of 24 to 36
in. lbs. (2.7 to 4 N·m).
006962
006963
006815
1. Upper cap screws 006964
1
1