17
If you need some help, call us on 0800 145 6789 or go to bt.com/bt3110
Using the phone
Switching the handset on and o
1.
Press and hold until the
handsetturnsonoro.
Making an external call
1.
Press
.
2. When you hear the dial tone,
type the number.
Preparatory dialling
1.
This lets you type in the number
rst,toavoidmistakes before the
call is connected. If you do make a
mistake, select
to delete the
last digit.
Ending a call
1.
Press .
Call timer
Your handset will automatically time
your outgoing and incoming calls.
The call timer will display after the
rst10secondsofthecall.Oncethe
call has ended, the total call time will
show on the display for 3 seconds.
Receiving a call
When you get a call, your phone will
ring and the
iconwillashonthe
display. If you’ve got a caller display
service, the caller’s number will show
on the display. Press
to answer
thecall.Whenyou’venished
talking, press to hang up.
Tip
Auto answer
If auto answer is set to ON, you can
answer a call by simply lifting the
handset from the base or charger.
You can switch this feature OFF so
that calls can only be answered by
pressing the
key. Auto answer
OFF is the default setting, see
page 34.