BT BT3110 - Using the Phone (Continued); Ringer Volume Control; Finding Your Handset (Paging)

Using the phone
20
Turning the handset ringer up,
down or o
1.
Open the main menu by
pressing , then scroll through to
PERSONAL SET using and
press
.
2. You’ll see HANDSET TONE on
the display screen, press
.
3. You’ll see RING VOLUME on the
display screen, press
.
4. Use the or again to scroll
through the volumes. Choose
between volumes 1-5 or OFF and
press
.
Finding your handset (paging)
You can alert a handset user that
they are wanted or locate a missing
handset.
1.
Press on the base. All handsets
registered to the base will ring.
2.
To stop the ringing, press on
the base again or press any button
on the handset.
If you get an incoming
call or text message while
you’re paging a handset, the
incoming call or message
takes priority and paging
will stop.
If the handset ringer is
switchedoonahandset,it
will be temporarily switched
back on so the handset can
be found.
Paging calls can’t be answered
by a handset.