BT BT3110 User Manual

Quick set-up guide
7
If you need some help, call us on 0800 145 6789 or go to bt.com/bt3110
Set up for additional handsets
(multipacks only)
1.
For additional handsets and
chargers: plug the mains power
adaptor into the mains wall socket
and switch on the power.
2.
Insert the batteries as explained
on page 5. If you set the time and
dateonthersthandsetthenitwill
be shared with all other handsets
in your multi pack once you insert
the batteries.
3.
Place the handset on the charger
to charge for 16 hours.
Using your BT3110 on a line
with broadband?
To avoid problems with your
broadband or noise on your
phone line, you might need to
plug your telephone line cord
into the wall socket via a
microlter(notsupplied).
If your main phone socket has
a single socket, you do need
tousemicrolters,likethis:
You’llneedamicrolterfor
every phone socket where
you’vegotequipment
plugged in – up to a
maximum of four per line –
including alarm sytems and
digital TV boxes.
You can get BT ADSL micro
ltersfrombt.com/shop
You don’t need to use
microltersifyourmain
phone socket has two
separate sockets, like these:
Tip
If you need to take the batteries out,
slide the battery cover down, then
gently take the batteries out.

BT BT3110 Specifications

General

Brand	BT
Model	BT3110
Category	Cordless Telephone
Language	English