If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
32
Your BT3920 can digitally record up to 20 minutes
of messages. You can operate your answer machine
from: the handset, the base or remotely from any
other Touchtone™ telephone (see page 41).
Using the answer machine from
the base
Switch the answer machine on or off
Press
to toggle between On and Off.
The setting is announced.
Message playback using the base
Press
. If you have messages they will be
played, new (unplayed) messages first followed by
old (played) messages.
During playback:
Press
to stop playback. The base will return
to idle.
Press
to delete the message being played.
Press to skip forward to the start of the
next message.
You’ll need to set the date and
time (if you’ve not already done
so) so that the answer machine
can correctly announce when
each message was received. To
set the date and time manually,
see page 44-45.
When the answer machine is
switched On, the red light on
the
button will light
up and the icon will be
displayed on the handset
screen.
When you receive new
messages you will be notified
by a message on the handset
display, the
icon on the
display will flash and the green
light on the button on
the base will flash.
If there are no messages (new
or old) when you press
,
you will hear, “ You have no
messages”.
Each message is played back
with the date and time it was
received announced.
Answer machine
To Next Page
Loading...
