BT BT3920 - Base Unit Management; Deleting Handsets and Changing System PIN

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Base settings 51
The default 4 digit system PIN
is 0000.
You cannot delete the handset
you are using to carry out this
action.
Once a handset is deleted it
will be removed from the list
of registered handsets and the
icon will disappear from the
display and Register will
be shown.
The default 4 digit system PIN
is 0000.
If you enter a digit incorrectly,
select
to delete it.
Delete a handset
Deleting a handset will de-register it from the
BT3920 base station. For more information on
using additional handsets and to register a handset,
see page 56.
1. Select Menu, scroll
Vol.
Calls
to BS settings and select .
2. Press
Vol.
Calls
to display Delete handset and select .
3. Enter PIN? is displayed. Enter the 4 digit system
PIN and select
.
4. All handsets registered to the base will be displayed.
Press
Vol.
Calls
or
Vol.
Calls
to select the handset you want to
delete and select .
Change the system PIN
1. Select Menu, scroll
Vol.
Calls
to BS settings and select .
2. Press
Vol.
Calls
to display Change PIN and select .
3. Old PIN? is displayed. Enter the existing 4 digit PIN
and select
.
4. New PIN? is displayed. Enter a new 4 digit PIN and
select
.
5. Confirm? is displayed. Enter the new PIN again and
select
. You will hear a confirmation tone.