BT BT3920 - Remote Access Scenarios; Accessing Messages Remotely

Answer machine
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
42
If you enter the incorrect
security PIN you will hear, “
Incorrect security code. Please
enter your security code”.
You have 2 chances to enter
the correct code before your
answer machine hangs up”.
Time saver feature
If you have set the answer delay
to Time saver, your answer
machine will answer after 2
rings if you have new messages.
If you do not have new
messages it will answer after 6
rings. This enables you to hang
up if you hear more than 2
rings before you are connected
therefore saving you the cost
of a call. See “Set the answer
delay” section on page xx.
If you do not choose to switch
your answer machine On, it
will switch off when the call is
ended.
5. New PIN? is displayed, enter your new 4 digit PIN
and select
. Confirm? is displayed, enter your new
PIN again and select
If you forget to turn on your answer machine
before leaving home
1. Call your number from another phone and let it
ring. After 20 rings the machine will turn on and
answer your call.
2. Press and enter your 4 digit security PIN when
prompted. Press
PQ
RS
to turn the answer machine On.
Check for messages
1. Call your number from another phone. When you
hear your outgoing message, press and enter
your 4 digit security PIN when prompted.
2. The machine will announce, “ To hear main menu,
press 1”. Press to listen to the menu options or
press
AB
C
to play all messages.