BT LWE130 - Maintenance, Lubrication Schedule - P2; Maintenance Schedule

Maintenance, Lubrication schedule – P2
Maintenance schedule
Order number Date Valid from serial number T-code
226057-040 2005-09-23 914369- 675
© BT Europe AB Service Manual LWE130 3- 1
3- Maintenance, Lubrication
schedule – P2
3.1 Maintenance schedule
I: Inspect, correct and replace if necessary. T: Tighten C: Clean L: Lubricate
M: Measure, correct if necessary
Pos.
no.
Work to carry out
Interval in days/weeks/months - may vary due to
application
1 d 1 w 12 m 36 m
0000 Chassis
0000.1 Check all links and locking pins I
0000.2 Check wear on battery locking I
0000.3 Check of cracking and damage I
0000.4 Check signs and stickers I
0000.5 Visual inspection of the bolt joint between the chassis
and the support arms.
I
0380 Fork carriage
0380.1 Check for crack formation and damage I
0380.2 Check clearance in bushes and links I
0380.3 Press grease into grease nipples I/L
0380.4 Check the lift limit switch I
1700 Drive motor
1700.1 Check clearance in connections I/T
1700.2 Check the carbon brushes in the drive motor M
1700.3 Clean the drive motor C
1700.4 Re-tighten the attachment bolts
T
2
1700.5 Check for abnormal noise in bearing I
2550 Drive gear
2550.1 Check for leakage
I
4
2550.2 Check for abnormal noise I
2550.3 Check the attachment and clearance in steering bearing I
2550.4 Change the grease in the drive gear L
https://www.besttruckmanuals.com/