BT LWE130 - Hydraulic Unit (6100); Hydraulic Cables;Cylinders (6230;6610)

Destruction instructions
Hydraulic unit (6100)
Order number Date Valid from serial number T-code
226057-040 2005-09-23 914369- 675
© BT Europe AB Service Manual LWE130 14- 7
14.12 Hydraulic unit (6100)
Disassembly
• Empty the oil from the hydraulics.
• Remove hydraulic cables.
• Remove the oil tank (1).
• Empty the oil from the tank.
• Remove the hydraulic unit (motor + pump) (2) (see 1710).
Material handling
Oil should be treated as dangerous waste.
Hydraulic cables should be placed in a container for oil-contaminated
components.
The tank should be placed in a container for PP.
The motor, together with the pump, should be placed in a container for
dangerous waste.
14.13 Hydraulic cables/cylinders (6230/6610)
Disassembly
• Remove the cylinder (1).
• Empty the oil from the cylinder.
• Cut the cylinder in half
• Remove the hydraulic cables (2).
• Remove the hydraulic hoses.
Material handling
The oil should be treated as dangerous waste.
Cylinder and hydraulic pipes are to be placed in a container intended
for iron and steel scrap.
Hydraulic hoses should be placed in a container for oil-contaminated
components.
2
1
2
1
https://www.besttruckmanuals.com/