Destruction instructions
General
Order number Date Valid from serial number T-code
226057-040 2005-09-23 914369- 675
© BT Europe AB Service Manual LWE130 14- 1
14- Destruction instructions
14.1 General
These instructions have been drawn up as part of the truck manufactur-
er’s environmental management program. An important motive is, by
taking nature into consideration, to economise with resources. In other
words, you should try to recycle all material as far as possible. This is to
minimise the discharge of environmentally-hazardous substances.
The dismantling instructions are divided into different C-codes (parts
and functions on the truck.) These C-codes are:
• 0000 Chassis
• 1000 Motors
• 2000 Transmission/drive transmission
• 3000 Brakes/belt/wheel system
• 4000 Steering system
• 5000 Electrical system
• 6000 Hydraulics/pneumatics
• 7000 Working function - lift mast
• 8000 Auxiliary/installation equipment
• 9000 Accessories/extra equipment
The instructions do not tell you the type of material the parts are made
of, but refer you to different material containers where the parts should
be collected. Some plastics are marked, which means some instruc
-
tions refer to the marking to determine the collection container to use.
14.2 Procedure
When sorting a component part you must know what plastic parts, liq-
uids, environmentally-hazardous substances and metals it incorpo-
rates.
https://www.besttruckmanuals.com/
To Next Page
Loading...
