6- 4 Service Manual LWE130 © BT Europe AB
Drive unit/drive gear – 2000
Service and repairs
T-code Valid from serial number Date Order number
675 914369- 2005-09-23 226057-040
6.2.5 Brakes, Maintenance
In general the brakes require no maintenance when used in a normal
working environment. However, according to the chart for preventive
maintenance it is recommended that the brake discs are regularly
inspected with regard to wear.
6.2.6 Replacing the brake disc
The brake disc should be replaced when its overall thickness has
decreased to 5.5
mm.
• Disconnect the electrical cables routed to the brake.
• Loosen and remove the two securing bolts.
• Loosen the brake disc from the hub and check the wear. Replace the
brake disc if the surface shows signs of uneven wear.
• Assemble the brake again.
• Connect the electrical cables.
https://www.besttruckmanuals.com/
To Next Page
Loading...
