12- 28 Service Manual LWE130 © BT Europe AB
Electrical system – 5000
Functional description
T-code Valid from serial number Date Order number
675 914369- 2005-09-23 226057-040
When the hand terminal is connected and the Key switch turned on the
following will be displayed:
The hand terminal version is first displayed.
Confirmation of connection to a SEM-X transistor regulator and
firmware version.
A - Transistor regulator’s firmware version.
B - Supply voltage.
C - Transistor regulator’s rated current.
D - Present hour meter value.
•Press ENTER (Fig. 15 C) to display the first menu.
• Cycle through the menus by repeatedly pressing the ROLL buttons
(
Fig. 15 B).
•Press OUT(Fig. 15 D) to leave the present menu.
• Buttons PARAM SET (Fig. 15 E) are used to adjust parameter val-
ues.
A
B
D
E
Fig. 15 Hand terminal overview
B
D
https://www.besttruckmanuals.com/
To Next Page
Loading...
