Bucher Municipal
V Range
105
JVM
V50 • V65 • V80 Operator’s Guide
Menu 4.10
Pendant LEDs are used to indicate which cylinders are being adjusted.
Select Slew direction using F2 (Left Hand) or F3 (Right Hand). On selection the WSB
will rotate and slew in the direction selected. All other sweepgear controls are locked for
this process.
Main Menu 4.10.1
Press F3 (Right Hand, icon goes o).
Two pendants are shown to indicated adjustment for Left and Right hand cylinders.
If tted(Optional) WSB Speed control becomes adjustable with potentiometer.
Menu 4.10.1.1
Select the Right Hand Cylinder by holding down top Right button on pendant. (Red LED
goes out). Use raise and lower buttons as indicated to achieve the required setting.
Releasing the Right hand button returns the screen to 4.10.1.
To Next Page
Loading...